Hg680 fj

[bluemeda]

No description provided.

[ophub]

有这个设备的dts源码吗？
刷armbian之前刷入的root的安卓系统有吗？
设备的外观和主板拍个照片，短接点标识一下。
设备的soc，内存，emmc，网络等关键参数介绍下。

[bluemeda]

STB HG680-FJ https://www.tvsfaq.com/en/streaming-device/telkom-indonesia-indihome-hg680-fj-hg680fj

SoC: S905X2, Quad-core ARM Cortex-A53, ARM Mali-G31 MP2
RAM: 2GB
eMMC storage: 8GB
Networking capabilities: 1 Ethernet 100Mb

bt/Wifi: mt7661/mt7668

USB Ports: 1 USB2, 1 USB3

DTS:


/* @sib0ndt */

/dts-v1/;

#include "meson-g12a-u200.dts"

/ {
	compatible = "hg680,fj", "amlogic,g12a";
	model = "HG680-FJ";

	vddgpu: regulator-vddgpu {
		compatible = "regulator-fixed";
		regulator-name = "mali";
		regulator-min-microvolt = <800000>;
		regulator-max-microvolt = <800000>;
		vin-supply = <&main_12v>;
		regulator-boot-on;
		regulator-always-on;
	};

	dc_in: regulator-dc_in {
		compatible = "regulator-fixed";
		regulator-name = "DC_IN";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};
	
	vusb_d_reg: regulator-vusb-d {
		compatible = "regulator-fixed";
		regulator-name = "vusb_d";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	vusb_a_reg: regulator-vusb-a {
		compatible = "regulator-fixed";
		regulator-name = "vusb_a";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	vddio_ao1v8: regulator-vddio_ao1v8 {
		compatible = "regulator-fixed";
		regulator-name = "VDDIO_AO1V8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vddao_3v3>;
		regulator-always-on;
	};

	wifi32k: wifi32k {
		compatible = "pwm-clock";
		#clock-cells = <0>;
		clock-frequency = <32768>;
		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
		clocks = <&wifi32k>;
		clock-names = "ext_clock";
	};

	leds {
		compatible = "gpio-leds";
		
		power_led {
			led_name = "power_led";
                        gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
			default-state = "on";
		};

		net_led {
			led_name = "net_led";
                        gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>;
			default-state = "off";
			linux,default-trigger = "0.0:00:link";
		};

		remote_led {
			led_name = "remote_led";
                        gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_LOW>;
			default-state = "off";
			linux,default-trigger = "rc-feedback";
		};

	};

reserved-memory {
    secmon@5000000 {
        reg = <0x0 0x05000000 0x0 0x03000000>;
        no-map;
    };
    linux,cma {
        size = <0x0 0x10000000>;
    };
};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x80000000>;
	};
};

&pwm_ef {
	status = "okay";
	pinctrl-0 = <&pwm_e_pins>;
	pinctrl-names = "default";
	clocks = <&xtal>;
	clock-names = "clkin0";
};

&mali {
	mali-supply=<&vddgpu>;
};

&hdmi_tx {
	status = "okay";
	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
	pinctrl-names = "default";
};

&hdmi_tx_tmds_port {
	hdmi_tx_tmds_out: endpoint {
		remote-endpoint = <&hdmi_connector_in>;
	};
};

/* SDIO */
&sd_emmc_a {
	status = "okay";
	pinctrl-0 = <&sdio_pins>;
	pinctrl-1 = <&sdio_clk_gate_pins>;
	pinctrl-names = "default", "clk-gate";
	#address-cells = <1>;
	#size-cells = <0>;

	bus-width = <4>;
	cap-sd-highspeed;
	sd-uhs-sdr104;
	max-frequency = <200000000>;

	non-removable;
	disable-wp;

	/* WiFi firmware requires power to be kept while in suspend */
	keep-power-in-suspend;

	mmc-pwrseq = <&sdio_pwrseq>;

	vmmc-supply = <&vddao_3v3>;
	vqmmc-supply = <&vddao_1v8>;
};

/* SD card */
&sd_emmc_b {
	status = "okay";
	bus-width = <4>;
	cap-sd-highspeed;
	max-frequency = <200000000>;
	vmmc-supply = <&vddao_3v3>;
	vqmmc-supply = <&vddao_1v8>;
};

&uart_A {
	status = "okay";
	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
	pinctrl-names = "default";
	uart-has-rtscts;

	bluetooth {
		compatible = "mtk,mt7663-bt";
		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
		max-speed = <2000000>;
		clocks = <&wifi32k>;
		clock-names = "lpo";
	};
};

/* CPU Overclock */
&cpu_opp_table {
	opp-1908000000 {
		opp-hz = /bits/ 64 <1908000000>;
		opp-microvolt = <1001000>;
	};
	
	opp-2016000000 {
		opp-hz = /bits/ 64 <2016000000>;
		opp-microvolt = <1021000>;
	};
};

&ethmac {
	/delete-property/ resets;
	/delete-property/ reset-names;
	phy-handle = <&internal_ephy>;
	phy-mode = "rmii";
	status = "okay";
};

&dwc2 {
    status = "okay";
    vusb_d-supply = <&vusb_d_reg>;
    vusb_a-supply = <&vusb_a_reg>;
};

[ophub]

Thanks for sharing. I’ve also added the firmware you shared to the OpenWrt repository: https://github.com/ophub/amlogic-s9xxx-openwrt
The DTS you submitted I will later push to the upstream kernel repository: https://github.com/unifreq/linux-6.12.y