sequencer: avoid progress when stderr is redirected#432
Merged
derrickstolee merged 1 commit intomicrosoft:vfs-2.33.0from Sep 23, 2021
Merged
sequencer: avoid progress when stderr is redirected#432derrickstolee merged 1 commit intomicrosoft:vfs-2.33.0from
derrickstolee merged 1 commit intomicrosoft:vfs-2.33.0from
Conversation
During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time. Reported-by: Victoria Dye <vdye@github.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
jeffhostetler
approved these changes
Sep 23, 2021
vdye
approved these changes
Sep 23, 2021
mjcheetham
approved these changes
Sep 23, 2021
dscho
pushed a commit
that referenced
this pull request
Oct 30, 2021
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Oct 30, 2021
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Oct 31, 2021
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Nov 4, 2021
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Nov 4, 2021
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Nov 10, 2021
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Nov 15, 2021
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 12, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 19, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 20, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 20, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 20, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 20, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 20, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 20, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 25, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
ldennington
pushed a commit
to ldennington/git
that referenced
this pull request
Jan 25, 2022
…rr is redirected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Feb 1, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 17, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 17, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 17, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 17, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 17, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 17, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 17, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 18, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 22, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jun 27, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Jun 27, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Jul 12, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Aug 31, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Sep 22, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Oct 5, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Oct 19, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Nov 23, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Nov 23, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Nov 23, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Dec 14, 2022
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Jan 17, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Feb 27, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Mar 2, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Mar 8, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
dscho
pushed a commit
that referenced
this pull request
Mar 14, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
derrickstolee
added a commit
that referenced
this pull request
Apr 25, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
vdye
pushed a commit
that referenced
this pull request
May 17, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
vdye
pushed a commit
that referenced
this pull request
May 17, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
vdye
pushed a commit
that referenced
this pull request
May 17, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
vdye
pushed a commit
that referenced
this pull request
May 20, 2023
…irected During a run of the Scalar functional tests, we hit a case where the inexact rename detection of a 'git cherry-pick' command slowed to the point of writing its delayed progress, failing the test because stderr differed from the control case. Showing progress like this when stderr is not a terminal is non-standard for Git, so inject an isatty(2) when initializing the progress option in sequencer.c. Unfortunately, there is no '--quiet' option in 'git cherry-pick' currently wired up. This could be considered in the future, and the isatty(2) could be moved to that position. This would also be needed for commands like 'git rebase', so we leave that for another time.
Merged
Merged
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
During a run of the Scalar functional tests, we hit a case where the
inexact rename detection of a 'git cherry-pick' command slowed to the
point of writing its delayed progress, failing the test because stderr
differed from the control case. Showing progress like this when stderr
is not a terminal is non-standard for Git, so inject an isatty(2) when
initializing the progress option in sequencer.c.
Unfortunately, there is no '--quiet' option in 'git cherry-pick'
currently wired up. This could be considered in the future, and the
isatty(2) could be moved to that position. This would also be needed for
commands like 'git rebase', so we leave that for another time.